Version 72 problems with server and client

[Paco Raap]

I had a android phone working as server with 3 other android devices as clients for 3 years.
All worked fine until the android server phone died.
I took an other phone as server and connected all clients to the server phone with the qr codes.
At that time it was summer and thermostat was not needed to work.
Today I switched on the thermostat and ran the program.
I found out the server was for all days set at 20 degrees.
My wife phoned to check the thermostat and I did on a client phone an made the changes to the program and save and exit.
When I got home the server said unknown error and when I check and change programs at the client they are not accepted and taken over on the server.
Is there a known bug or user error from my side?

Thanks, Paco

BTW I have the paid version for running the boost mode.

[admin]

Hi!

thanks for reporting this issue. I checked the programs feature, and indeed, it seems to be a problem. Please, give me a couple of days to fix the bug an publish a new release. I will post here as soon as the new version is available.

Regards!

[admin]

Hi!

a new version (73) is available on the play store.

I hope the bug is fixed now.

Regards!

[Paco Raap]

Thank you will try tomorrow.

Paco

[Paco Raap]

Hola, I confirm all is working fine again.
Master and client update programms vice versa.

Mucho gracias,

Paco Raap

[Paco Raap]

Currently the program shows relay error.
I cant find the solution or reason for this error message.
Power cycled ESP32 with same result.
I see relay coming on at same time as thermostat shows flame icon.
If I put the thermostat in manual mode the relay goes off and on in about 1 minute cycle even if set temp is not reached.

Paco

[Paco Raap]

If I log in on IP I get these high minus values of temp and humidity.
From previuos experiences this means there is a disconnection of the temp/humidity sensor.
After connecting sensor properly again the Relay Error is gone.

{
“type”:”TH&Relay”,
“name”:”Thermostaat”,
“version”:”4″,
“relay_error”:””,
“th_error”:”TIMEOUT”,
“mac”:””,
“relay_high”: “1”,
“relay_high_level”: “1”,
“celsius”:”-10000.00″,
“fahrenheit”:”-10000.00″,
“humidity”:”-10000.00″,
“wifi_ssi”: “-51”
}

[admin]

Indeed, if the temperature sensor is not properly connected, an error occurs. So, is it working correctly, or is there some other issue?

[Paco Raap]

I confirm that version 73 is working fine now.

Thanks, Paco

[Magyar Viktor]

Hello for me, version 73 is not good either, I tried it on several devices, it works on the server, but there is no data on the clients
Please help me

[Paco Raap]

Magyar, did you try to remove all apps first on master and clients and than first newly install master and clients afterwards?

Paco

[Magyar Viktor]

Yes, I installed , reinstalled the server and client, but the client does not display temp/humanity data.
The server is correct displays data, but if I connect the client with qr code logs in but, me, there is always no display data on the cliens side

[admin]

Hi!

Those who are having problems with the clients (v73). Could you provide more information?

Is there any kind of error message, or something that can point me in the right direction?

Regards

[Magyar Viktor]

HY Admin

No error messages, just no data visualization on cliens

[admin]

I will take a look at it, but I could take a couple of days. Sorry for the inconvenience.

[Author]

Posts